Pingxiang Zhongtai Environmental Chemical Packing Co., Ltd.  

Product Name: Plastic Tri-Pack Ball for Tower Packing Model NO.: ZT-PTP Source: Particle Effect: Improve The Wear Resistance Usage: Chemical Industry Product Type: Random Packing Structure Feature: Balls Material: Plastic Trademark: ZHonGTAI Transport Package: Woven Bag, Ton Bag with Pallet Specification: 38mm/50mm/76mm/100mm Origin: China HS Code: 3926909090 Product Description Products Introduction of Plastic Tri-PakPlasticTri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.Technical Specification of Plastic Tri-PakProduct namePlastic tri-pakMaterialPP, PE, PVC, CPVC, PPS, PVDFLife span>3 yearsSize mmSurface area m2/m3Void volume %Packing number pieces/ m3Packing density Kg/m3Dry packing factor m-125859081200812832709225000702550489311500621695389518004512Feature1. Tri-Packs are hollow, spherical packings made of injection molded plastic, available in four diameters: 25, 32, 50, 95mm.2. Symmetrical geometry made from a unique network of ribs, struts, and drip rods.3. High active surface areas.4. Extremely low pressure drops.5. Extremely high operating capacities.Advantage1. High and mass heat transfer rates.2. Excellent gas and liquid dispersion characteristics.3. Resist nesting, making removal easily.4. Available in a wide variety of plastics raw material.5. Predictable performance.Application1. Stripping, de-gasifier and scrubber.2. Liquid extraction3. Gas & liquid separation4. Water treatmentPhysical & Chemical Properties of Plastic Tri-PakPlastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF). The temperature in media ranges from 60 Degree C to 280 Degree C.Performace/MaterialPEPPRPPPVCCPVCPVDFDensity(g/cm3) (after injection molding)0.980.961.21.71.81.8Operation temp.(ºC)90>100>120>60>90>150Chemical corrosion resistanceGOODGOODGOODGOODGOODGOODCompression strength(Mpa)>6.0>6.0>6.0>6.0>6.0>6.0Packaging & ShippingPackage typeContainer load capacity20 GP40 GP40 HQTon bag20-24 m340 m348 m3Plastic bag25 m354 m365 m3Paper box20 m340 m340 m3Delivery timeWithin 7 working days10 working days12 working daysOur Factory assure all tower packing made from 100% Virgin Material.The production processOther Related products